Docs

Florida Mesh Documentations, How-tos and Configuration Setup Guides.

Start with the Introduction, then follow the section for your network, either Meshtastic or MeshCore. Each section covers regional settings, node configuration, and installation. The Weekly Mesh Net runs on both networks at the same time.

In this section

• Introduction
  An introduction to what the Florida Mesh community is about.
• General Docs

  General Mesh Systems documentation and guides.

  Stay tuned.

  • Weekly Mesh Net
    Florida Mesh's weekly on-air net, run concurrently on Meshtastic and MeshCore.
  • Bots and Automation
    Where bots, scripts, and automated responses belong on the Florida mesh.
  • MQTT Server
    The Florida Mesh MQTT server supports individual account credentials.
  • MeshBot Commands
    Public MeshBot command usage for the Florida Mesh Discord server.
• MeshCore Docs

  MeshCore documentation and guides.

  • Regional Settings
    Florida's MeshCore modem preset, and the region scoping work in progress.
  • Node Configuration
    Configuring MeshCore companion clients and repeater infrastructure for the Florida Mesh.
  • openHop Repeater Installation Guide
    Installing a MeshCore repeater on a Raspberry Pi with openHop Repeater and the optional openHop Console.
• Meshtastic Docs

  Meshtastic documentation and guides.

  • Regional LoRa Settings
    This is an active directory for each of the State's Regions and the Meshtastic LoRa RF settings. This document will be updated and maintained as frequency presets change.
  • Node Configuration
    Recommendations for configuring your node and contributing to the mesh.
  • Meshtasticd Installation Guide
    Guide to install Meshtasticd on a Raspberry Pi and ESP32 Firmware Updating